Undermount sink is becoming very popular choice among people who are upgrading their kitchens. These sinks look modern and give an elegant look to your kitchen. Undermount sinks are typically installed under solid surface counter tops. Installing an undermount sink might seem like a complicated home improvement project.

However, some manufacturers provide precut, predrilled countertops to make the installation process easy but in other cases, you have to work with an uncut countertop. In such cases you will have to cut the hole yourself.

Various kinds of sink like single bowl, double bowl and triple bowl are available. You need to select one according to your choice and need. After selecting you can cut your countertop according to the size of sink of to be installed.

Start cutting the countertop after checking the template and finding out the correct location where you need to install the sink. Make a mark on your countertop according to size of sink. Be attentive while marking as an incorrect mark can prove to be expensive.

For cutting purpose, you can drill a hole of 3/8″. As a hole will be created you can further use a saber saw to cut it along the marked line. A keyhole saw or a handsaw can also be used for same purpose but they work little slowly. After completely cutting the countertop for installing the sink, drill holes for mounting screws also.

While drilling, the countertop surface and sink space gets dirty. So you need to clean it. Plumber’s putty is used to make the sink hold tight and long lasting. Mounting screws should be tightly closed and during this process some putty oozes out. Clean this putty afterwards.

For water supply, a water faucet and a drain is required to be installed in the sink. The drain should be properly installed so that no water spread out here and there.

Leave the plumber’s putty for 24 hours to dry and stick properly. After that, connect the water supply in the stem of faucet. Just for checking leakage in faucet, turn on the water supply. If leakage is there, again tighten the pressure coupling gently and cross check the connections. After curing the leakage, you can start working in your new kitchen sink.

Scott Rodgers is a noted writer who has been providing ample guidance on plumbing works all across the nation. His expensive knowledge has, in fact, sparked significant rise in revenue for talented plumbers across the nation, from Gibsonton Plumbers (Need one?click here!) to Corcoran Plumbers (Need one?click here!).

Tagged with: • •

Filed under: Business

Like this post? Subscribe to my RSS feed and get loads more!